Nana's Ginger Beer | Community Recipes | Nigella's Recipes (2024)

Print me

Introduction

One of the few recipes handed down in my family is this recipe for a Ginger Beer Plant and Ginger Beer. It's delicious, refreshing and naturally carbonated. All cup measures are metric cups, and Aussie tablespoons are 20ml measures not 15ml

Ingredients

Serves: Makes about a dozen 750ml bott

For the Ginger Beer Plant

  • 8 golden raisins
  • ¼ cup lemon juice
  • 1 teaspoon grated lemon zest
  • 1 tablespoon sugar
  • 2 teaspoons ground ginger
  • 2½ cups water

For the Ginger Beer

  • 3 cups sugar
  • 5 cups boiling water
  • 3 lemons (strained juice of)
  • 14 pints water

Method

Nana's Ginger Beer is a community recipe submitted by Coby and has not been tested by Nigella.com so we are not able to answer questions regarding this recipe.

  • First make your plant by combining all ginger beer plant ingredients (golden raisins, juice, rind, sugar, ginger and water) in a screw top jar and leave for two to three days.
  • Then, for the next seven days feed your plant daily by stirring in 2 tsp ground ginger and 1 tbsp sugar each day.
  • To make the ginger beer, place the sugar in a large basin and stir in the boiling water. Continue to stir until dissolved. My family always used regular granulated sugar here, not caster - it's up to you what you choose.
  • Cover with fine muslin (my Nana used an old, clean but worn piece of sheet) and pour the ginger beer onto the muslin. Pull up the sides and squeeze out all the moisture you can from the plant, until it's as dry as can be.
  • Stir in the lemon juice and 8 litres of water.
  • Store in sterilised, screw top bottles leaving a space of at least 'three fingers' at the top to allow for expansion - lest they explode.
  • Store carefully, especially in warmer months. Ideally do not open for three to four days, at which time it should be delicious and fizzy.

Additional Information

My father tells me they never had an explosion, but he knew of plenty of people who did- he surmises mostly due to not leaving the space to expand. He also tells me that those who bottled theirs with a cork, often heard the corks pop off, especially in warmer weather! This recipe is true to my Nana's original recipe, apart from my Dad converting it to metric back in the 1990's. I love knowing that my father used to get to feed the plant as a child and that he could never wait the three days to drink it. The final product is expected to have some sediment at the bottom, I suspect this is due to squeezing the contents of the muslin/sheet. I am told though you must do this, to ensure the fullest flavour.

Asked and Answered

Tin For Walnut And Ginger Carrot Cake

From pollywolly28
  • 14
  • 2

Tell us what you think

What 5 Others have said

  • Recipe is wrong. You MUST wait for the liquid to cool before adding contents of ginger plant. I now have seven litres of flat ginger beer.

    Posted by Philealing on 17th June 2020
  • This is great, only difference in method from mine is that you dump the bottle of ginger culture into the cooled sugar, water and lemon. Leave it overnight and then strain and bottle. Take half the ginger culture at the end (discard the other half) and put it into a jar with a cup of water and start feeding it again for ten days then repeat.

    Posted by MarkANorrie on 16th March 2020
  • I'm wondering what country measurements this is using.UK pints are different to the USA pints.

    Posted by Osram on 15th June 2019
  • If you add the ginger beer plant to the sugar water when it is over 30 degrees the heat will kill it and secondary fermentation will not take place. It is better to add the heated water and sugar to the additional water - check the temp is about 25 degrees before adding the plant

    Posted by Jedgor on 4th June 2018
  • Hello i was just wondering if i put a cap on the jar while fermenting and feeding of my ginger beer plant?

    Posted by Beerbaron91 on 1st November 2015

Show more comments

Nana's Ginger Beer | Community Recipes | Nigella's Recipes (1)

Other recipes you might like

Nana's Ginger Beer | Community Recipes | Nigella's Recipes (2)
Grapefruit Margarita
By Nigella
  • 14
  • 2
Nana's Ginger Beer | Community Recipes | Nigella's Recipes (3)
Dirty Lemon Martini
By Nigella
  • 14
  • 2

Recipe by dreamsurfer69

Ginger Cake Surprise
By dreamsurfer69
  • 14
  • 2

Recipe by Bobotie

Seafood 'Leftover' Quiche
By Bobotie
  • 14
  • 2

Join in

Send us your recipe

Ask us a question

Share a tip with us

Nana's Ginger Beer | Community Recipes | Nigella's Recipes (2024)

FAQs

How to make potent ginger beer? ›

Ingredients
  1. 1 kg White Sugar (Granulated) - For an interesting flavour combination try 500 grams Brown and 500 grams White Sugar.
  2. 200 grams Fresh Root Ginger (Add more for a stronger Ginger flavour)
  3. 2 Fresh Lemons (Or use 2 Oranges to add more flavour dynamic)
  4. 4.5 Litres of water.
  5. 11 grams Beer Yeast (I use Gervin)

What kind of yeast to use for ginger beer? ›

Ingredients Needed for Ginger Beer:

I always go with organic fresh ginger root because it contains plenty of natural bacteria and natural yeasts for the best ginger beer. Some people add brewer's yeast (beer yeast) or champagne yeast to this recipe to boost the activity and alcohol content.

How much alcohol is in homemade ginger beer? ›

Brewing your own alcoholic ginger beer is no big deal! If you like the fiery taste of ginger, you'll love this homemade fermented drink. Its alcohol content is similar to that of a beer, which is usually between 3 and 5%.

How long do you leave ginger beer to ferment? ›

Bottle in sealable bottles: Recycle plastic soda bottles with screw tops; rubber gasket “bail-top” bottles that Grolsch and some other premium beers use; sealable juice jugs; or capped beer bottles, as described in chapter 11. Leave bottles to ferment in a warm spot for about 2 weeks. Cool before opening.

What happens if you let ginger beer ferment too long? ›

Let ginger beer ferment too long, it's very dry and has no sweetness at all. Almost unpleasant.

How much ginger do I need for 5 gallons of ginger beer? ›

Ingredients: • 2 lbs peeled, diced ginger root • 5 lbs organic cane sugar • 5 limes (zest and juice) • Water to make 5 gallons • Yeast nutrient (dose per manufacturer instructions) • 1 packet S-04 yeast Boil 2.5 gallons of water, then remove from heat. Stir in sugar and yeast nutrient until well dissolved.

References

Top Articles
Latest Posts
Article information

Author: Gov. Deandrea McKenzie

Last Updated:

Views: 6203

Rating: 4.6 / 5 (46 voted)

Reviews: 85% of readers found this page helpful

Author information

Name: Gov. Deandrea McKenzie

Birthday: 2001-01-17

Address: Suite 769 2454 Marsha Coves, Debbieton, MS 95002

Phone: +813077629322

Job: Real-Estate Executive

Hobby: Archery, Metal detecting, Kitesurfing, Genealogy, Kitesurfing, Calligraphy, Roller skating

Introduction: My name is Gov. Deandrea McKenzie, I am a spotless, clean, glamorous, sparkling, adventurous, nice, brainy person who loves writing and wants to share my knowledge and understanding with you.